- Uhhh no tranny/rear gear tech?
- Converter choices which should i get?
- Spool or not to spool
- New Converter Ordered
- TCS 4400 Converter
- EBC rotors
- Good to see TCS as a sponser
- Gear install
- Lock-up switch??
- New moderator here
- Brake pin?
- Rear...
- M6 guys who are in need of a clutch...
- i really need to get a pair of drag radials but dont know what to go with BFG orNITTO
- who is going to run a spool this year
- FREE stock rear
- Tcs Stage 3 Transmission
- Got a TA cover and stuff.
- TA girdle & stud kit is installed.
- Did you know the clutch fluid CAN'T be changed on our pieces?
- best 12 Bolts or 9 inch
- Broke the Posi in my 10bolt yesterday
- rear swap
- ========Update on my rear end============
- BIG THANKS to ...... TCS ......
- Thank You Rich @ CARTEK!!
- REaR is in
- SLP TCS Module
- Updated '02 "ZO6" clutch hydraulics installed.
- SLP take-out rear is in...
- Anyone know the bolt size for M6 shifter bolts?
- my shifter got stuck in 4th gear tonight and wont come out!!!
- Line lock???
- Where to jack the tranny for a new mount?
- what could this mean?
- ATTN: Mike BadAzzZ28 rear for you!!!!
- shifters
- New TCS Converter Installed
- tranny experts ?
- 3rd gear pop out
- Clutch Question
- Guess who burned through a clutch...or maybe a tranny
- not sure
- tranny update
- I pulled my ford 9" chunk out this morning.
- Rear went BOOM.
- Another One Bites The Dust
- trannys toast
- lookin for a t56
- Anyone Have A Tranny ??
- New rear is in the car
- T350 Swap Time
- tested new TCS Tranny tonight
- Rear End Went...I need Help!
- pro 5.0
- Strange 4:10's are in.
- DAMMIT somethings about to blow up!!!!!!!!!!!!!!
- New Tranny Is Almost Done !!
- Thanks to NRC Motorsports
- I ordered the ZO6 clutch...
- My ZO6 clutch is in....
- SLP line lock
- New Clutch
- Don't like the sound of this
- Ordered Gears...
- Ordered Clutch
- line lock ????
- torque Converter..
- Gears........
- Ordered new clutch
- Ordering a new Rear End on Monday
- New Tranny Parts ordered!!
- New clutch is in-AGAIN
- Strange 4.10's are in...
- SPEC stage 3 installed
- slp line lock install
- Talk about Service.......Vette Doctors.....
- Tranny is done!!
- whats wrong?
- burnout
- Well its officially cold out...
- Vigilante...
- Look what came today in the big brown truck
- my drivetrain doesnt like me.....
- Goodies Coming!!!!!
- t56 leaking fluid out of tail shaft
- gonna be waiting awhile......
- a little update...
- need gears installed
- 3.90 gears now available for the Strange 12 bolt
- Converter is gettin a restall
- Thanks to Jeff
- car's fixed !
- interesting....
- Another one bites the dust!!
- Strange Vs. Moser
- torque converter & ring and pinion
- gears and torque converter
- 700R4 BILLET INPUT DRUM/SHAFT Group Purchase
- High RPM Shifting problems
- vette LS1's and T56
- Clutch fluid
- Problem!! HEEELP!!!
- Pic's of the 8.8 rear
- FYI: 9" rear and TA dont fit
- Installed the 8.8
- busted something...input please?!?!
- Stock rear
- Tranny rebuild place
- PT4400 TC Done!!!!
- Weird sound from tq converter
- The Ask Jeff thread
- Low coolant light is on, but it's not low ???
- Picked up a 12-Bolt today!
- 4.10s on LI
- New converter!
- JFMS Transmission Pics
- T56 imput shaft end play spec
- possible fix to my problem....
- How can i tell if i have a 3 or 4 series carrier in my Moser?
- Don't know where this goes...
- Put my Moser 12-bolt in...
- Trans is in - thanks to Jeff & Jeremy
- Link to pics of so called Stage3 trans
- Rebuilt Trans by Jeff is A/OK
- 4.10's on stock auburn rear?
- Shifters?
- Interesting INfo For A4 Guys...
- LS1 trans
- LS1/LT1 drive shafts
- Time for a change M6 or TH350 ?
- clutches n stuff
- Line Lock Installed - thanx NRC!
- ZO6 upgrade
- clutch
- Big Thanks To Bob @ NRC
- Flywheel Retainer?
- My Richmond 4.11's just arrived.
- TCS 4400 1.7 Str Vertor for Sale
- newbie here but serious question
- clutch
- t 56
- Tranny took a crap?
- which converter
- Torque Converter..
- Problem with the 4L60E??
- Deep Trans Pan..
- One more for you guys..
- the vette doctors are good
- Corvette Servo's..
- Paging Jeff406
- How long until breakage?
- A4 to M6 swap is complete.
- A4 rebuild
- Bang!
- where to get a good tranny rebuild on li?
- A4 to M6 .. what do i need??
- clutch and flywheel
- The Official Pick Me A new TRansmission Poll
- Has anyone Seen...
- 1le...
- TC and Stuff..
- Project 4l80 Has begun!!!
- Screw Vigilante
- Bump In Passengers Side Floor
- What gear are you th350/400 guys running?
- LI shop with bearing press open sunday?
- Yank..
- What size....
- 4l80 fbody conversion
- Yank converter..
- midwest converters
- >>>>>dynoman,update................
- toms,car
- 12 bolt On Board
- broke a wheel stud....in rear/moser. hard to fix?
- Rears..
- What would you do?
- Who else has a tranny temp gauge???
- Th350..
- i keep ripping off my shifter
- How much should it cost me?
- "Shrifter"???
- tire size
- 4L60E speedometer hookup
- Cat Backs...
- Nitto NT 555's..
- Well I finally made a decision on my next transmission!
- Moser 12 fluid
- Come and check out my new drivetrain(pic)
- What gears?
- Durien.....
- A4 Tranny Shift Kit and Torque Converter
- Need 4:10 gears installed (Long Island Area)
- Short throw Shifter question
- Big thanks to NRC & Assoc.
- SLP 4:10's crap?
- installed a moser 12 bolt
- A4 to M6
- Install help on spec stage 3 clutch
- Billet Steel or Aluminum Flywheel?
- knocked rear springs out of place
- Spec 3 PP's coming apart!!
- who wants to do the drill mod for me
- my moser is finally quiet!
- T56
- How to make a LS1 rear fit an LT1..
- Textralia..
- 6 Speed Cross Member..
- Quick Update..
- from a4 to m6..
- Went with some Gears too..
- Thinking of switching over to a TH400
- How much...
- Parts are coming in
- Problem's A'Brewing..
- Whine from my rear
- 700-r4
- Online Tranny Places
- A4 to M6
- aftermarket shifter on an a4 console
- What was the only year you could get a 3:23 m6 f-body ??
- 3.23 to 3.73
- 2nd Gear Problem Seems To Be Fixed
- Rear axel swap
- what kind of cllutch do you have and are you happy w/ it?
- Ordered Clutch.....
- which is better for drag race ?
- Hey Mako
- Rhut-Ro! :sigh:
- Driveshaft Question
- Built T56's...
- Shop to pull/press rear diff bearings
- New Posi 0r 12-Bolt....
- A new clutch option...
- Plastic bushing in shifter
- B&M RIPER INSTALL
- TCI AND SUMMIT big BIG let down
- 4.11 in an A4
- Which clutch
- T56 rebuild
- Bleeding clutch master
- Smoked my Clutch
- Detroit Tru-Trac Posi
- 1998 z28 need help
- Help!! I smoked my clutch
- 4:10 gears?
- Stock DS
- ls1 drivetrain 4 sale
- What would I need to put in a TH400?