carb or tpi?

[WyClefsMach1]

i have alil problem. i can't find anywhere to tune my car. not a prom i can mail order a place i can bring the car and have them tune the car.

so i was thinking about going carb. whatca guys think?

[89Formula350]

I have seen on other posts that your looking to build a 350. If your going to put a big cam in it , It would be alot cheaper to go with a carb setup. Your stock TPI only makes low end power. Only upto around 4500-4700RPMs. Aftermarket injection ( MiniRam, SuperRam,StealthRam) will give you the RPMs you need if your planning on a larger cam but one of those setups will cost you around $1000- $1500.

[Krazzycowgirl]

Theres alot of Speed shops in NJ ( I dont know how far away you are because I live on the other coast) Just do a yellow page search on yahoo.

[diggla]

he's in lindenhurst n.y. its about 2 hrs from the 440 in nj

[Krazzycowgirl]

Originally posted by 89Formula350
I have seen on other posts that your looking to build a 350. If your going to put a big cam in it , It would be alot cheaper to go with a carb setup. Your stock TPI only makes low end power. Only upto around 4500-4700RPMs. Aftermarket injection ( MiniRam, SuperRam,StealthRam) will give you the RPMs you need if your planning on a larger cam but one of those setups will cost you around $1000- $1500.

No matter what if he goes with a Stealthram hes going to need to find a local ship that has the capabity to make Proms. I am finding out the hard way that buying from a place that you cant take the car to is a waste of money. Spent $365 on a chip from an out of state place & its starting to look like I will be spending $1k to get a proper chip & tuning done on my car from a local company.

[Krazzycowgirl]

Then Try these guys they might know who would do things like that.

S & S Speed Shop
(718) 849-3299
10465 Atlantic Ave
Jamaica, NY

[Krazzycowgirl]

Or even better these guys
http://www.drtracing.com/drt.htm
DRT NOW OFFERS IN HOUSE DYNO TUNING!
DRT HAS JUST ACQUIRED A DYNOJET 248C!

So now we can tune your car for peak performance.


Oops thats a civic place but they might know or can do your car as well.

[89Formula350]

Originally posted by Krazzycowgirl
No matter what if he goes with a Stealthram hes going to need to find a local ship that has the capabity to make Proms. I am finding out the hard way that buying from a place that you cant take the car to is a waste of money. Spent $365 on a chip from an out of state place & its starting to look like I will be spending $1k to get a proper chip & tuning done on my car from a local company.

no need to get custom proms burnt anymore. Get a Prominator Chip and download any bin file you like in afew seconds. Or make a custom bin file as you like for your car. All downloads from a laptop. I got one 2 weeks ago, this things great. www.prominator.com

[Krazzycowgirl]

Yea for me I still need them to tune my stuff & Dyno it so its still going to cost me the $1k